re: honda 300 fourtrax 4x4 help

I cleaned my Fourtrax 300 carb last week.
1. Take off seat
2. Remove gas tank
3. Remove frame bracket seat bolts to
4. Unscrew choke cable
5. Un hook throttle cable
6. Loosen two clamps on each side of carb & remove carb out top of frame.
7. Watch some you tube videos on carb cleaning
LINK
8. Go to bolt and screw store to buy new screws to replace the ones you had to cut the stripped heads off to remove the bowl.
9. Re-install carb

Carb cleaning is pretty easy. Take it apart and clean the jets with a small piece of wire from a wire brush. Only adjustment is to set the idle air mixture screw to 1 1/8 turn out. I use a 4 six pack beer case box with shop towel placed in bottom to disassemble carb so I don't lose or misplace anything.