- My Forums
- Tiger Rant
- LSU Score Board
- LSU Recruiting
- SEC Rant
- SEC Score Board
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Jon boat repair : Rivets
Posted on 2/20/15 at 9:35 pm to Polar Pop
Posted on 2/20/15 at 9:35 pm to Polar Pop
Can you drill out the inside rivets and when they are loose tap them out the back? That way the outside of the boat should not have a larger hole.
You can always add washers to the inside of the rivet or a plate.
You can always add washers to the inside of the rivet or a plate.
1
Posted on 2/20/15 at 9:38 pm to eng08
I think I might be able to keep it clean if I use a step bit or just use a 3/16 then gradually move up until the rivet head pops off.
I just wonder if the machine bolts will actually be stronger and a better option than going back in with pop rivets?
I just wonder if the machine bolts will actually be stronger and a better option than going back in with pop rivets?
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News