re: Educate me on weedeater wire...

Wrap both strings tightly at the same time and make sure to keep them curling in like they came out of the package when you do. Then, clip them into the little cutouts, and put it back on. Pull the strings out at the same time once you get it all together. That'll tighten it up a little bit and get the spool facing correctly so it'll come out right. Most people don't know to do that and it causes the most problems.

Start
Knock the head on the ground until too much line is out
It'll cut it off and you're ready to go

Do not use string bigger than .095" or you will wear out your engine with the quickness. Less powerful engines require smaller string. I find that stepping up in size makes a considerable difference though, and I run 0.095" every day.


I figured this would be a problem for the gaming board not the OB