- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Mechanical Help 2003 Chevy Silverado 1500HD
Posted on 5/12/14 at 4:21 pm to ThatsAFactJack
Posted on 5/12/14 at 4:21 pm to ThatsAFactJack
quote:
I was quoted roughly $2300 by Firestone.
That's a relatively easy DIY job by the way. Basic tools and a few rentals from Autozone/Advanced/Pepboys/etc and maybe 3 - 4 hours if you take your time. I did upper/lower ball joints and sway bar links on my beater truck (Ranger) and the inner/outer tie rod ends on the gf's Silverado in the same afternoon. Probably spent less than $300 on both trucks.
GM needs to learn to stop putting compact truck tie-rods in their full sizes. Did outer tie-rods and new ball joints on a friends 2500 4x4 and the OEM parts are pathetic compared to Ford, Dodge, and the replacement Moog parts.
Posted on 5/12/14 at 4:29 pm to Clames
Doing the ball joints makes it take a good while longer. 8 big arse rivets per side.
This post was edited on 5/12/14 at 4:29 pm
Popular
Back to top
Follow TigerDroppings for LSU Football News