- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: OB boat mechanics
Posted on 4/26/14 at 2:28 pm to MallardMaster
Posted on 4/26/14 at 2:28 pm to MallardMaster
First thing I would check is your prop, make sure it not bent and the ports on the prop are open if you have some.
Posted on 4/26/14 at 2:36 pm to hogdaddy
Prop is fine. Motor idles and runs fine at the lower rpm so it doesn't seem to be the plugs or a problem with ignition in a cylinder. Has all it's power jumping out the hole and it didn't decrease max rpm over time so I doubt it to be low compression on a cylinder. It seems to me like a fuel issue but I don't know where to start on this motor. If it was carbureted I would have pulled them and cleaned them. Not sure how the fuel ingection system works.
Also we just changed the fuel water separator before the first trip.
Also we just changed the fuel water separator before the first trip.
This post was edited on 4/26/14 at 2:39 pm
Popular
Back to top
![logo](https://images.tigerdroppings.com/images/layout/TDIcon.jpg)