- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: On my way to Searchers 4x4- UPDATE: Death Wobble cured
Posted on 5/1/13 at 1:38 pm to Hammertime
Posted on 5/1/13 at 1:38 pm to Hammertime
I'll get the pics in a few...
Two different trackbars, always torqued past 130lbs, 150# right now
New draglink
All 4 ball joints
Everything loosened at ride height and retourqed.
Welded washers on both sides of the trackbar mounts.
Swapped between tierods, both factory though.
Numerous wheel balances and alignments. Running 35" on 15"
Two different trackbars, always torqued past 130lbs, 150# right now
New draglink
All 4 ball joints
Everything loosened at ride height and retourqed.
Welded washers on both sides of the trackbar mounts.
Swapped between tierods, both factory though.
Numerous wheel balances and alignments. Running 35" on 15"
Posted on 5/1/13 at 1:40 pm to fightin tigers
Once this rain passes I'm gonna get up under there and at least tighten the tie rod ends for a temporary fix until I get it to the shop.
Posted on 5/1/13 at 2:04 pm to fightin tigers
quote:
I'll get the pics in a few...
Two different trackbars, always torqued past 130lbs, 150# right now
New draglink
All 4 ball joints
Everything loosened at ride height and retourqed.
Welded washers on both sides of the trackbar mounts.
Swapped between tierods, both factory though.
Numerous wheel balances and alignments. Running 35" on 15"
Are your bolts the correct size? some models have a size a hair too small
are all of your bolt holes, still in circles and not ovaled?
Axle straight? C's bent?
When you changed tie rods, did you change the ends as well?
What size tire do run and on what axle?
This post was edited on 5/1/13 at 2:07 pm
Posted on 5/1/13 at 3:51 pm to fightin tigers
You could have sockets that are opened up on your upper/lower control arms where the joint used to go. Rubber bushings could be in need of replacement. Are you sure you got the correct part numbers? Did you get a new pitman arm with the lift?
My guess is the angle between the track bar and drag link if those others were all done
Eta: waiting for pics......
My guess is the angle between the track bar and drag link if those others were all done
Eta: waiting for pics......
This post was edited on 5/1/13 at 3:55 pm
Popular
Back to top
![logo](https://images.tigerdroppings.com/images/layout/TDIcon.jpg)