- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Official AR-15 thread
Posted on 7/22/15 at 2:59 pm to Buck_Rogers
Posted on 7/22/15 at 2:59 pm to Buck_Rogers
quote:
- AR-15 Vise Block
No, this is for assembling an upper. Yours will already be assembled.
I was referring to this vise block for the lower.
![](https://cdn3.volusion.com/jbmff.rawwc/v/vspfiles/photos/SD20-101-4.jpg?1414525161)
Posted on 7/22/15 at 3:04 pm to Mark Makers
Not needed. It's basically a non functional magazine just to hold the receiver in one place in case you tend to fumble around and drop things. You could always stick a piece of wood in their or use an old beat to hell magazine if you insist on it.
Posted on 7/22/15 at 5:30 pm to Mark Makers
Having recently finished my first lower build and buying just about everything on your list I'd only repurchase the roll pin punches (regular punches will work but I think the roll pin punches make the job MUCH easier) and starters, decent non marring hammer, castle nut wrench, and the cool looking cleaning assembly pad
The vise block just didn't seem to work for me, I was never in a good position to do what I wanted and ended up just holding the lower or resting it on the mat. The other specialty tools were useful but definitely not needed unless you just like buying tools, like I do.
![](https://images.tigerdroppings.com/Images/Icons/IconLOL.gif)
This post was edited on 7/22/15 at 5:32 pm
Popular
Back to top
![logo](https://images.tigerdroppings.com/images/layout/TDIcon.jpg)