So I have an RRA stripped lower that I'm going to do a .300 BLK build with. I'm pondering which lower part kit to use and I've narrowed it down to the following:

1. CCMG - no buffer tube kit or stock, but probably the cheapest option and has good reviews

2. RRA - Only about $15-$20 more than the CMMG kit and also does not include buffer tube kit or stock. For some reason I feel like I should use an RRA kit with an RRA lower. I'm basing that on nothing though

3. Palmetto State - At least $50 more than the other two, but includes mil-spec buffer tube kit and stock. I could also wait for one to come in-stock that has Magpul furniture.

Anyone have thoughts/experience/guidance with these options? TIA

3 ...

Report Post

Posted by colorchangintiger

Dan Carlin

Member since Nov 2005

30979 posts

Posted on 2/22/13 at 11:14 am to SW2SCLA

quote:
SW2SCLA

Where do you shoot? I'd like to come around and see a little bit of your assembly. I'm about to order a 80% lower and start my first build.

1 ...

Report Post

Posted by hashbrowns

Shitholeastan

Member since Nov 2011

2380 posts

Posted on 2/22/13 at 11:27 am to SW2SCLA

If you're wanting the Magpul, stock I'd get the RRA LPK and then order the buffer tube and Magpul stuff separately.

0 ...

Report Post

Posted by Uncle JackD

Member since Nov 2007

58680 posts

Posted on 2/22/13 at 11:28 am to SW2SCLA

quote:
So I have an RRA stripped lower that I'm going to do a .300 BLK build with. I'm pondering which lower part kit to use and I've narrowed it down to the following

I used CMMG LPK, buffer tube from joe bobs, and a magpul stock. I didn't wanna pay extra for a kit with butt stock that I knew I wasn't gonna use.

1 ...

Report Post

Outdoor Board - Replies to Post

Return To Board

Page 1

Return To Board