Extendable trail cam antenna for WiseEye

Do you need a booster? Get a herd 360 if so. It comes with a long cable. If you want to use the original antenna then just need a cable with a male sma to female sma. Herd360 will have that too

Herd is great!

Pine sap is tricky because it’s sticky, resinous, and hardens in the sun, but you can get it off your solar panel safely without scratching the glass or damaging the coatings. Here’s the best approach:

?

Step 1 – Rinse Loose Dirt
• Use a garden hose with plain water to wash away dust, pollen, and loose debris.
• Don’t use a pressure washer—it can damage seals.

?

Step 2 – Soften the Sap
• The key is to loosen the resin before wiping. You can use:
• Warm, soapy water (let it soak with a microfiber cloth for a few minutes).
• Isopropyl alcohol (70–90%) – safe for glass and will dissolve sap.
• Mineral spirits – effective but use sparingly, and rinse thoroughly afterward.

(Avoid acetone or strong solvents, they can damage the panel’s anti-reflective coating.)

?

Step 3 – Gentle Removal
• Place a microfiber cloth soaked in your chosen solution over the sap spot for 5–10 minutes.
• Then gently rub with the cloth or use a plastic scraper (like an old credit card) to lift the softened sap.
• Never use metal blades or abrasive pads—they can scratch the glass.

?

Step 4 – Final Clean
• Wash the panel again with mild soapy water.
• Rinse thoroughly with clean water.
• Dry with a soft microfiber cloth or let air dry.