- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Coaching Changes
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Metal Building Interior Walls
Posted on 7/29/25 at 1:43 pm
Posted on 7/29/25 at 1:43 pm
Looking to "box" in the interior walls of my insulated metal building. Considering wrapping it with one 4x8 sheet of plywood to give me 8' tall walls all the way around.
Pros, Cons, Do's, Don'ts???
Pros, Cons, Do's, Don'ts???
1
Posted on 7/29/25 at 4:22 pm to 225tigahhh
that’s standard operating procedure. Your building should have a girt at 7’ something, stand your boards up and use self tapping screws and a screw gun with a clutch. It will help to drill pilot holes in your plywood
Posted on 7/29/25 at 6:25 pm to cgrand
I put a 2x4 along the bottom anchored in the slab as well. Then used 5/8 plywood screwed in at the top/middle/bottom
Posted on 7/29/25 at 7:58 pm to LSUtigerME
yes good call on that especially if the girts are bypass and not flush
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News