re: Trailer Bearing Replacement near Baton Rouge

New replacement wheel hubs with bearing and seals already installed were about 70 bucks two years ago. Back the wheel nut off, slide the old assembly off and use a bunch of paper towels to clean shaft. If shaft has burrs on it use some emory cloth to smooth. Pack the new assembly with grease and reinstall.

helps access if boat is off trailer.

Use gear oil hypoid 90 , to paint the springs, mounts etc that look rusty

I used to remove pressed in bearing with hammer and screw driver. worked but sucked.

reinstalling the bearing cover use a block of wood across it to beat in evenly