Page 1
Page 1
Started By
Message

Airless Sprayer Recs

Posted on 8/11/23 at 9:00 am
Posted by poochie
Houma, la
Member since Apr 2007
6765 posts
Posted on 8/11/23 at 9:00 am
Building out my garage/garage kitchen and have a lot of painting to do. In addition to sheetrock walls and ceilings, I have cabinetry, trim, and a shiplap wall/staircase. Considering purchasing an airless sprayer setup for this work (or at least the woodwork). Any recommendations on a sprayer that is quality while not breaking the bank or should i just brush/roll everything?
Posted by RaginCajunz
Member since Mar 2009
7086 posts
Posted on 8/11/23 at 9:07 am to
I have the small Graco Magnum Project Painter. I scored it for a steal on Amazon a few years back. Nothing handles gloss trim paint like an airless sprayer. I purchased the roller attachment and redid most of my house while our carpet was getting ripped out. HIGHLY recommend it, even the "baby" Graco like I have is a workhorse.

Posted by poochie
Houma, la
Member since Apr 2007
6765 posts
Posted on 8/11/23 at 9:45 am to
For reference, how much waste is there with a sprayer? Is there a lot of waste with the priming and cleaning process?
Posted by RaginCajunz
Member since Mar 2009
7086 posts
Posted on 8/11/23 at 9:50 am to
quote:

For reference, how much waste is there with a sprayer? Is there a lot of waste with the priming and cleaning process?



Basically the volume of the hose. However, I found the application process so much better that it is worth the loss. You will lose to priming, but apply a perfect shell on trim. The roller attachment I found much more judicious with its use of paint once primed.

Short answer, 1/10 of a gallon easily. I wouldn't hook the roller up for a small room, but I would for 2-3 rooms.
Posted by idlewatcher
Planet Arium
Member since Jan 2012
92746 posts
Posted on 8/11/23 at 9:51 am to
quote:

For reference, how much waste is there with a sprayer?


Overspray is where that comes in. Coats are much lighter when applied and that's exactly what you want - thin coats applied.

quote:

Is there a lot of waste with the priming and cleaning process?


Negative. Since the sprayer is more or less a closed loop, you can pour the extra back in the paint can, use mineral spirits to clean up the gunk and then water. Just be sure to clean the head though or you're in trouble when you spray next.
Posted by poochie
Houma, la
Member since Apr 2007
6765 posts
Posted on 8/11/23 at 9:56 am to
thanks guys. i was worried that it would take a gallon or two just for priming and cleanup.

between the garage and garage kitchen it's a good bit of painting that needs to take place and i think this might do me well. (at minimum the "cost of doing business" to not get into any marital spats, ha!)

i'll look into the graco model listed above...
Posted by Clames
Member since Oct 2010
18927 posts
Posted on 8/11/23 at 1:35 pm to
I have a Graco project unit collecting dust now, picked up their professional cordless sprayer a few years ago and it's been awesome so the small paint projects I do. Did doors, cabinets, trim, and a few accent walls with it. Much less overspray than the project painter, very little waste and you lose nothing but a few drops in priming. Best part is the disposable paint cups, pretty easy to clean too.
Posted by bootlegger
Ponchatoula
Member since Dec 2012
5511 posts
Posted on 8/11/23 at 2:30 pm to
I picked up a Wagner Control Pro 130 few months back. So far have only used it to re-stain my ~750sqft deck, and it was really quick and easy.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookXInstagram