- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Boat refurbish recommendation
Posted on 3/1/23 at 9:24 pm to Duck Island
Posted on 3/1/23 at 9:24 pm to Duck Island
Prepare your wallet if you’re paying someone else to do the work
I rebuilt our 33T contender last year (there is a build thread on here somewhere for it), and it wasn’t cheap. And I did all the work myself minus fiberglass and paint.
Like others said, check fuel tanks while your at it if it’s an older boat. If you’re going all in, you’ll regret not replacing them (or at a minimum inspecting them) while the boats stripped down.
As far as places to do the work, David Wade in Br and Outcast in Des Allemands are 2 of the best in the area for wiring. If going mercury I’d use David Wade. If Yamaha or Suzuki then go Outcast. Not gonna be cheap, but it’ll be done right.
Glassmasters is awesome for fiberglass work.
I’d offer to do rewiring, but I just do it on the side and I’ve already taken on more side jobs than I wanted to this year.
Just curious, what kind of boat we talking about?
I rebuilt our 33T contender last year (there is a build thread on here somewhere for it), and it wasn’t cheap. And I did all the work myself minus fiberglass and paint.
Like others said, check fuel tanks while your at it if it’s an older boat. If you’re going all in, you’ll regret not replacing them (or at a minimum inspecting them) while the boats stripped down.
As far as places to do the work, David Wade in Br and Outcast in Des Allemands are 2 of the best in the area for wiring. If going mercury I’d use David Wade. If Yamaha or Suzuki then go Outcast. Not gonna be cheap, but it’ll be done right.
Glassmasters is awesome for fiberglass work.
I’d offer to do rewiring, but I just do it on the side and I’ve already taken on more side jobs than I wanted to this year.
Just curious, what kind of boat we talking about?
This post was edited on 3/1/23 at 9:28 pm
Posted on 3/2/23 at 8:36 am to CP3
I followed your thread and it was great so thank you for that! Was hoping you would respond. The boat is a 34’ Venture w/ twin HPDI 250’s which are running. The cost of a new one is crazy high so it’s kind of a bargain to redo this one.
Popular
Back to top
Follow TigerDroppings for LSU Football News