- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Small welding job recommendations (BR area)
Posted on 7/22/22 at 10:32 am
Posted on 7/22/22 at 10:32 am
Looking for someone who does small welding jobs on the side. I have a zero-turn lawn mower and the welds broke off where the front caster wheels connect. Ideally looking for someone who can come to my location as I can’t move the mower easily.
Posted on 7/22/22 at 10:37 am to Hsmith
If you know how to stick weld, Home Depot on Coursey rents a generator with welding capability.
If you make multiple passes, you could weld a little thicker than that. I rented it to repair a fence, and it worked good enough.
quote:
Welder/Generator Rental
by Lincoln Electric
Low-Lift™ Grab Bars
1-1/4 in. (32 mm) Diameter Rugged Tube Frame
AC Welding with up to 1/8 in. (3.2 mm) Stick Electrode
quote:
$64.00 for 4-Hours
If you make multiple passes, you could weld a little thicker than that. I rented it to repair a fence, and it worked good enough.
This post was edited on 7/22/22 at 10:40 am
Posted on 7/22/22 at 10:41 am to Hsmith
I'm not in BR and can't recommend a welder, but you should go anead and remove the spindle, bearings and races from the part that you want welded back onto the mower frame if that is what broke. Also, clean all the grease out of it. If it is part of the caster assemply that broke, it might be better to just replace that.
Also, just curious, what make and model zero-turn mower do you have?
Also, just curious, what make and model zero-turn mower do you have?
Posted on 7/22/22 at 7:17 pm to Hsmith
A friend of a friend on Facebook shares this places posts a lot. I have no idea their work but they do travel.
C and C specialty welding. Looks like they are near Holden, La.
C and C specialty welding. Looks like they are near Holden, La.
Posted on 7/23/22 at 11:18 am to Hsmith
Whereabouts do you live?
I'm in BR and have a HF wire feed welder. I am not a welder but I can fuse pieces of metal together. Welds aren't pretty but they hold.
Let me know if I can help. I charge in beer (after I'm done).
ETA - my welder requires 220V. Do you have a dryer outlet or other 220V circuit access nearby? Otherwise, that's going to be a problem .
I'm in BR and have a HF wire feed welder. I am not a welder but I can fuse pieces of metal together. Welds aren't pretty but they hold.
Let me know if I can help. I charge in beer (after I'm done).
ETA - my welder requires 220V. Do you have a dryer outlet or other 220V circuit access nearby? Otherwise, that's going to be a problem .
This post was edited on 7/23/22 at 12:36 pm
Posted on 7/23/22 at 2:19 pm to Hsmith
Make sure you tell him “it’s all prepped and ready to weld” but leave the paint and dead grass all over it.
Posted on 7/23/22 at 8:49 pm to Hsmith
Butlers welding off tiger bend has done good work for me.
Posted on 7/24/22 at 1:37 pm to Hsmith
I could, gonna be 475. What your address
Popular
Back to top
Follow TigerDroppings for LSU Football News