Favorite team:LSU 
Location:Somewhere b/w east and west
Biography:I hacked Hillary's emails
Interests:Freedom
Occupation:
Number of Posts:13
Registered on:3/17/2017
Online Status:Not Online

Recent Posts

Message

Bayous to explore in S. Louisiana

Posted by PFGeezy on 7/9/17 at 9:01 pm
So the other day after seeing some paintings of bayou scenes and houses on stilts perched righ off the water amidst Spanish moss-covered trees it occurred to me...why can't I go see that for myself? So if I were to launch my boat into one of the bayous with the intention of cruising down it to see what there is to see, which ones are best?

re: Blazer 9mm stovepipes in FNX

Posted by PFGeezy on 5/15/17 at 5:46 pm to
Can you also lean backwards and dodge these slow bullets like Neo?

Blazer 9mm stovepipes in FNX

Posted by PFGeezy on 5/15/17 at 12:50 pm
Went to the range today and shot a few magazines of Blazer 9mm from a FNX auto. The casings would fail to eject about every other shot. Anyone else have problems with these bullets?
So is there anyone who has actually lived there that can give an answer?

re: Official AR-15 thread

Posted by PFGeezy on 3/20/17 at 12:36 am to
I guess the situation is somewhere between the gunsmith I went to using the TSAR (that seems about right) method, and me just being a little particular. If I get time this week I'll bring it in and we can see what we're lookin at and what's doable. At Blake's they sell and inexpensive adjustable block that I've been wanting to buy so maybe it's a good time to throw that on there instead.

re: Official AR-15 thread

Posted by PFGeezy on 3/19/17 at 3:38 pm to
Both. It's got a pin hammered into the bottom and then two set screws. I may come in this week!

Where does one go to buy a nice flask?

Posted by PFGeezy on 3/19/17 at 1:34 pm
Where should I go to buy a nice (but not crazy expensive) flask for a birthday gift?
Ahh I gotcha. Rocket plane as in, they wouldn't have turbine engines like regular jets?

re: Official AR-15 thread

Posted by PFGeezy on 3/19/17 at 12:42 am to
Anyone know the best AR gunsmith in Baton Rouge? I "built" my first AR (bought all the pieces and paid a gunsmith to put it together). It's not a huge thing but when I look down the rail I notice my gasblock doesn't sit perfectly straight. This causes the BCG to knock the gas tube back to center when the bolt cycles. Was wondering if I could find a local, reputable person to straighten it.

re: Disposing of used auto oil

Posted by PFGeezy on 3/19/17 at 12:30 am to
Bring it to AutoZone, they have a tank in the back where they let you dump it for free.
"Speak softly and carry a big stick."

Yep, I'd say he should be up there.
Does anyone watch The Man in the High Castle? If so, in the second or third episode, is that big jet with the swastika on the back supposed to be a Concorde?