Favorite team:Georgia Tech 
Location:Pass LaLoutre, Louisiana
Biography:
Interests:
Occupation:
Number of Posts:11
Registered on:1/13/2016
Online Status:Not Online

Recent Posts

Message
This will do the calculations for any scenario you can dream up… OpenSocialSecurity.com

re: Outboard motor help

Posted by boomerhuntsducks on 1/19/25 at 7:18 am to
Start simple, charge your starting battery. Cold weather equals poor battery performance. if you don’t have enough voltage, even though it cranks, the ecm will not work. From another…. Preferably, the voltage should remain at a minimum of 11.5VDC even while cranking/trimming.

Somewhere around 11.1 VDC, weird things.
Put 3 LiTime mini LiFePO4 batteries in the boat six months ago to run MinnKota 36 volt trolling motor. Very impressive. Had 2 two day trips running spotlock non stop and the batteries came home at 50-75% charge. Using NOCO 3 bank charger setup to the lithium charge setting. 3 minis at 17 lbs each versus 3 agms at 35 lbs each. Only known issue- don’t charge in low temperature, no low temp protection in the brains. Pull the trigger with the specials they are running now.
Want to add a T-top to my 2003 Sea Pro CV21. Any recommendations?
Just finished my upgrade to lithium. Three LiTime Mini 100mAH for Terrova 36v trolling motor. Added bluetooth Victron battery monitors to each for voltage and temperature. (Don't charge these if temperature is under 40F). $362 each. Using Noco 3 bank 15A charger. Small profile, 19 lbs each.
Remove it! Easy to do and peace of mind far outweighs the hassle of adding oil manually

re: Phillips Hue Lights

Posted by boomerhuntsducks on 2/4/19 at 8:31 pm to
Can you connect the hue motion sensor to alexa to control non-hue devices? I would like the hue motion to turn on some wemo switches.
Thanks for the cabelas link, picked one up free shipping :cheers:

re: Tire Advice

Posted by boomerhuntsducks on 12/5/16 at 5:07 pm to
I have the same truck with the worn out Goodyears and have a 2" lift kit.

What size did you decide to go up?

Original P275/55R20
Option A: 275/60/20
Option B: 275/65/20
Removed mine 2 days ago. Take a section of bicycle inner tube, wrap around barrel twice, to protect barrel finish. Clamp, really CLAMP, on Vice grips on barrel, close to the hider. Put Vice grip handle in Bench Vice. Remove with 3/4" wrench.