- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Help me diagnose my printer issue
Posted on 8/21/20 at 9:38 am
Posted on 8/21/20 at 9:38 am
All the cartridges are 75% or higher, yet I'm getting a really shitty print. Black seems ok, cyan sort of ok because it's printing those icons toward the bottom but the HP logo is barely there, yellow seems to kinda be showing up, but magenta is not really anywhere to be seen. Aside from the colors lacking, it seems like the sides of the sheet aren't printing with the same quality as the middle of the page.
Paid about $350 for this thing at Costco about 2 years ago.
Any thoughts?
Paid about $350 for this thing at Costco about 2 years ago.
Any thoughts?
This post was edited on 8/21/20 at 9:39 am
2
Posted on 8/21/20 at 10:05 am to Chucktown_Badger
Nozzles need to be cleaned. Or print heads need to be changed if it has separate print heads. That is my guess.
Posted on 8/21/20 at 10:56 am to SG_Geaux
Thanks for the reply. Will look into that.
Posted on 8/21/20 at 2:40 pm to Chucktown_Badger
Yep, like SG said...maintenance...clean nozzles and wipe of all rubber rollers
Posted on 8/21/20 at 5:50 pm to BabySam
I go long stretches without printing so I'm thinking it's the fricking printer heads for sure. It seems like there's a way to unclog them if i can get them out. Getting them out will be the issue.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News