Page 1
Page 1
Started By
Message

DIY Projects for Deer Season

Posted on 11/13/26 at 10:52 pm
Posted by TigerOnThe Hill
Springhill, LA
Member since Sep 2008
7722 posts
Posted on 11/13/26 at 10:52 pm
Hey guys. It was busy this year getting ready for deer season with a number of projects. I had 2 new barrels to install and work up loads as well as 3 stocks and barrels to paint. 

First, I bought an ER Shaw barrel in 308 Win for my Savage Striker. It had a good price since I bought it during the Valentine's Day sale. The Striker had been semi-retired for the past 10 years while I turned my attention to Remington XP-100s. I decided to bring the 308 out of retirement with a new threaded barrel so I could run a suppressor on it. The original stock barrel was very accurate, but too thin to thread. Although I’ve developed arthritis in my dominant hand, shooting with suppressors helps greatly. The factory barrel came off and the new barrel went on easily. Setting the headspace was done without problems. I also worked up new loads for the barrel using the discontinued Hornady 130 gr spire point. The 125 gr Nosler BT and Accubond loads for the old barrel shot well in the new barrel. Compared to the XP stock, the Striker is very thick and downright clunky. Before being put out to pasture, I put the stock on a diet, sanding away a lot of plastic. After installing the new barrel, the stock got a new paint job. I was disappointed by my paint job. Areas of the stock that had been sanded had a porous appearance while other areas had a very uneven uptake of the paint. I ended up turning to Krylon light brown camo paint and Rust-Oleum Marble Effect black. The Marble Effect paint looks like thin spider webs. It covered up the inconsistent areas really well. The Marble Effect paint is tricky to apply. Generally, less of the Marble Effect is better. If I ever decide to redo the stock again, I’ll use a roll of stick on vinyl camo instead of paint.


Next was a Remington XP in 25 Remington Bench Rest with a McMillan stock and Shilen barrel. The stock had already been painted a number of colors before I bought it used. I’ve had the gun a number of years, but never had liked the color scheme I painted on the stock and barrel. This time, I used FDE Aluma-Hyde II from Brownell’s on the barrel, bolt and stock base paint. I then added various other colors of camo paint to the stock using a “sea sponge” technique from YouTube. I’ve used the 25 BR to kill a hog using the 100 gr Nosler BT so I plan on hunting with the 100 Nosler Partition this year.  


Last was the Savage Strirker 350 Legend I built using an ER Shaw barrel. I caught the barrel during the 4th of July sale. Removing the old 243 Win barrel and installing the new barrel was easy, but setting the headspace on the new barrel look some time. The 350 Legend doesn’t have a shoulder on which to set the headspace. Instead it headspaces on the mouth of the cartridge. The Nosler brass I first used was much shorter than usual, causing problems setting the headspace for the “no go” gauge. I finally got it right using proper length Starline brass. I’ve built 2 other guns from Savage 270 Win actions and was able to use the factory firing pin, but the stock 243 firing pin didn’t fit into the smaller 350 Legend bolt head so I had to buy a new firing pin from Midway. The new firing pin and bolt head installed ok, but I damaged the ejector so it doesn’t work. I’ll replace the ejector later. I painted the barrel with Aluma Hyde II Olive Green while the stock was painted with Rust-Oleum green paint with texture and the black Marble Effect paint. The Marble doesn’t show up well because the green is so dark. I used a one piece Weaver multi-slot base for the scope. The scope base slot head screws failed using my usual 30 ft# of torque. There were no instructions and their website failed. I sent an email (Customer Service department ment was labelled as RCBS) asking for replacement screws. CS said they’d send some, but were never received. In the meantime, I bought some from my local gunsmith since the season was getting close . The PDF from CS recommended torque of only 15 f#. I worked up loads using the 155 gr Sierra Pro Hunter and Hornady 170 InterLock bullets with Shooter’s World SBR-Socom powder.. I killed a doe with the Hornady bullet during the AR Alternative Firearm Season. I bought a YHM R-9 suppressor for the gun on the “2nd Amendment Tax Free” weekend, but it didn’t arrive in time for the October hunt.


It was a race to the finish line, but it looks like I got everything done in time for the opening of AR Modern Gun deer season in a few days.

Observations: Aluma Hyde II is more durable than the usual rattle can paints, but more difficult to apply. Brownell's recommends letting it cure for a couple weeks at room temperature. Their alternative is to cook it in an oven at 190 degrees for 3 hours. I chose the latter.

Whereas the XP is a right hand bolt, the Striker is a left hand bolt. I’ll have to get used to the left hand bolt.The Striker also has a 2 round internal box magazine while the XP is single shot.

Don’t bother painting the Savage barrel nut since you’ll most likely knock some paint off using the barrel nut wrench (like I did).

Use as little of the Marble paint as possible to obtain the desired effect. Practice spraying it on.

When you think you’ve shaken the Aluma Hyde II enough, shake it for a couple more minutes.

All three guns got 3 light coats of matte clear spray after the painting was done.

I’m pleased with both ER Shaw barrels. These are my first Shaw barrels. The prices were economical, turnaround faster than quoted and communication good. So far, the accuracy is MOA, but may improve with more load development.Hey guys. It was busy this year getting ready for deer season with a number of projects. I had 2 new barrels to install and work up loads as well as 3 stocks and barrels to paint. 
This post was edited on 11/13/26 at 10:53 pm
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

Facebook•X•Instagram