- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Posted on 11/22/19 at 8:26 pm to eng08
Tint the finish maple does not like stain that’s why most finishes are tinted so it’s consistent. Color
.
.
Posted on 11/23/19 at 1:52 pm to eng08
Not sure, I live in lake Charles.
Posted on 11/25/19 at 5:41 pm to eng08
Well first place was a bust, any better rec?
Posted on 11/25/19 at 6:32 pm to eng08
Paint the legs and stain the top?
Posted on 12/6/19 at 7:18 pm to Aristo
Nah. I’ll just coat it all with shellac to seal and then stain.
I got all my maple wood today and it’s 8 ft long. I saw other recommendations to store it inside until i am ready to use it but I don’t exactly have space for it all under my bed unless I cut it.
If I cut it to roughly length to store inside, would that cause it to warp more than if left long?
I got all my maple wood today and it’s 8 ft long. I saw other recommendations to store it inside until i am ready to use it but I don’t exactly have space for it all under my bed unless I cut it.
If I cut it to roughly length to store inside, would that cause it to warp more than if left long?
Posted on 12/11/19 at 9:34 am to eng08
Did you buy it wet? Unless it needs time to dry, which might cause you some problems with the lady due to how long that's going to take, the reason to store it the environment it will be used in once completed is so that the wood is properly acclimated to the moisture content in the air.
Trust me, I built a dining table with breadboard ends entirely outside, and after it had a few days to acclimate I had to cut my breadboard ends down a quarter inch on each side once the tabletop acclimated.
Trust me, I built a dining table with breadboard ends entirely outside, and after it had a few days to acclimate I had to cut my breadboard ends down a quarter inch on each side once the tabletop acclimated.
Posted on 12/11/19 at 9:58 am to HoldenOversoul
It was relatively dry but in an unconditioned warehouse
I figure I’ll cut/make the pieces outside then bring them back in each night
I figure I’ll cut/make the pieces outside then bring them back in each night
This post was edited on 12/11/19 at 10:20 am
Posted on 12/11/19 at 10:20 am to eng08
I usually try to buy my material a week in advance.
Posted on 12/11/19 at 10:22 am to Aristo
It’s going to take me forever to make this, I only get 1-2 hrs each night of potential productivity after I put my kids to bed
Posted on 12/11/19 at 10:25 am to eng08
quote:
It’s going to take me forever to make this, I only get 1-2 hrs each night of potential productivity after I put my kids to bed
Don't worry about the time, just do what you can each night. I have the same issues with a 4-year-old and a 2-year-old, plus halfway through my Master's. I haven't been able to do anything in the last 3 months, so one of my bathrooms is 80% done on a vanity and countertop build.
Posted on 12/11/19 at 4:04 pm to eng08
It was probably kiln dried wood. I wouldn't worry about it being too unstable as far as warping or anything like that.
Only thing I would do is probably make sure any glued up panels are given some time to acclimate to the interior environment prior to cutting to final dimensions.
Only thing I would do is probably make sure any glued up panels are given some time to acclimate to the interior environment prior to cutting to final dimensions.
Popular
Back to top
Follow TigerDroppings for LSU Football News