Question on Frying Pig Skins at Home

Put the pork skin in a large pot and cover with water. Weigh down with a plate to keep it submerged. Bring the water to a boil and cook until the skin is soft and pliable but not falling apart and the water is white, 1 1/2 to 2 hours (adding more water as needed).

Carefully remove with a large spider or slotted spoon and arrange the skin in an even layer, with no folds, on a cooling rack set over a baking sheet. Discard the cooking water. Put in the fridge, uncovered, and allow to cool until completely cold, about 2 hours.

Once the skin is cold, use a spoon or bench scraper to remove all subcutaneous fat, being careful not to tear the skin. Place the scraped skin on a rack set over a baking sheet. Set the oven to its lowest possible setting (ours was at 200 degrees F) and dehydrate the skin overnight, until dry, brown and brittle. After this step you can break the skin into pieces and store in the freezer in small batches for frying at a later date.

Thank ya!