Page 1
Page 1
Started By
Message

Concrete Splatter

Posted on 5/23/20 at 1:41 pm
Posted by FishinTygah84
LA
Member since Dec 2013
1976 posts
Posted on 5/23/20 at 1:41 pm
Had a concrete patio poured yesterday. They got splatter all over my windows and a small vinyl siding section. I got it off the windows ok. I tried vinegar on the vinyl siding part but have had no luck. Any other tricks? Or do I need to just go buy some type of acid or something
Posted by CheEngineer
Louisiana
Member since Aug 2019
4234 posts
Posted on 5/23/20 at 1:53 pm to
Had one poured several years back. They did the same. I did put up 4ft of plastic sheeting that caught most of it. The rest I let dry and then would basically get it to flake off with the flex of the vinyl.

Good luck I can only imagine the mess you have based on what the plastic caught for me.
Posted by ItzMe1972
Member since Dec 2013
9777 posts
Posted on 5/23/20 at 4:32 pm to
Try sulfamic acid. You can buy crystals at Home Depot in flooring department. Works great on mortar, and will probably do ok with cement too.
Posted by Purpleblooded
Member since Dec 2019
580 posts
Posted on 5/24/20 at 5:56 am to
What’s the trick to getting cement off bricks. Same issue but splatter ok bricks
Posted by eng08
Member since Jan 2013
5997 posts
Posted on 5/24/20 at 6:50 am to
I made them cover my windows and walls from the eves to the ground Bc I didn’t want to do this.
Posted by fightin tigers
Downtown Prairieville
Member since Mar 2008
73674 posts
Posted on 5/24/20 at 9:23 am to
quote:

What’s the trick to getting cement off bricks.


Wet the wall of bricks, then use a loose brick to rub the surfaces with splatter.
Posted by fightin tigers
Downtown Prairieville
Member since Mar 2008
73674 posts
Posted on 5/24/20 at 9:24 am to
Pressure washer will knock off the dried concrete pretty well
Posted by FishinTygah84
LA
Member since Dec 2013
1976 posts
Posted on 5/24/20 at 4:08 pm to
Just tried pressure washer. Got off some of the dime sized splatter but any smaller than that no luck
Posted by Spelt it rong
Louisiana
Member since Oct 2012
10002 posts
Posted on 5/25/20 at 8:28 am to
WD40 worked for me. Goof Off is good stuff too, but be careful because it'll remove the finish off anything
Posted by fightin tigers
Downtown Prairieville
Member since Mar 2008
73674 posts
Posted on 5/25/20 at 9:42 am to
quote:

Just tried pressure washer. Got off some of the dime sized splatter but any smaller than that no luck


Look into muratic acid then. You will need to dilute it.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram