- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Paint Question
Posted on 6/15/21 at 7:57 am to will1883
Posted on 6/15/21 at 7:57 am to will1883
You can use enamel primer and go over it with latex.
Just make sure it is totally dry and if there's any runs from spraying them, lightly sand them out and scuff the rest before putting on the final coats for better adhesion.
I've always used enamel primer at half tint to the finish color when priming prior to painting houses that have been sanded down to bare wood in places. I just think enamel adheres better than latex primers and I've never had any issues going over enamel with latex.
However, some DIY types will have latex roll and peel if it is applied over enamel painted doors and trim simply because they don't do the necessary prep work. If using latex over enamel on doors and trim, sand them to scuff the surface for the paint to stick well.
ETA: Make sure the metal is clean as in no oily residue on the surface or the paint will be compromised.
Just make sure it is totally dry and if there's any runs from spraying them, lightly sand them out and scuff the rest before putting on the final coats for better adhesion.
I've always used enamel primer at half tint to the finish color when priming prior to painting houses that have been sanded down to bare wood in places. I just think enamel adheres better than latex primers and I've never had any issues going over enamel with latex.
However, some DIY types will have latex roll and peel if it is applied over enamel painted doors and trim simply because they don't do the necessary prep work. If using latex over enamel on doors and trim, sand them to scuff the surface for the paint to stick well.
ETA: Make sure the metal is clean as in no oily residue on the surface or the paint will be compromised.
This post was edited on 6/15/21 at 10:14 am
Popular
Back to top
![logo](https://images.tigerdroppings.com/images/layout/TDIcon.jpg)