- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Who can shorten a driver shaft in BR?
Posted on 4/20/20 at 7:36 am
Posted on 4/20/20 at 7:36 am
(no message)
3
Posted on 4/20/20 at 8:14 am to DaDaTigers
I posted in the other thread, but why not choke up?
You could change the properties of the driver and maybe for the worse.
You could change the properties of the driver and maybe for the worse.
Posted on 4/20/20 at 9:01 am to DaDaTigers
I just cut my M6 down to 44 inches. I ripped the grip off, put masking tape on the area I needed to cut and shapied the cut line. Then I got a $6 fine tooth hack saw from Lowe’s and cut the shaft. Then regrip. I was surprised how easy it was. Also I’m hitting the center of the face so much more and it’s much easier to control.
It seems a little ridiculous that off the rack clubs are 45.75 inches long now when pros don’t average that length.
It seems a little ridiculous that off the rack clubs are 45.75 inches long now when pros don’t average that length.
Posted on 4/20/20 at 12:24 pm to DaDaTigers
If you cut it with a hacksaw be absolutely certain to rotate the shaft as you cut.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News