Started By
Message

re: How to re-engage car air compressor

Posted on 6/23/18 at 10:06 pm to
Posted by BHM
Member since Jun 2012
3165 posts
Posted on 6/23/18 at 10:06 pm to
If the clutch is not engaging,it is because it is being told not to or a problem with the clutch such as clutch gap too large or open coil winding.


If you have a good meter, you can carefully check if the clutch is getting voltage or not. Reasons for not getting voltage are many. Bad relay, bad pressure switch, pressure too low, loose wire, had computer, loose ground.

Being that it works in the cool morning but not in the hot afternoon kind of points to a pressure problem.
Posted by lsucoonass
shreveport and east texas
Member since Nov 2003
68484 posts
Posted on 6/23/18 at 10:11 pm to
Iirc the pressure needs to be as close to 40 as possible?
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram