- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Trolling Motor Issues...
Posted on 6/9/17 at 2:01 pm to nwhsallstar2000
Posted on 6/9/17 at 2:01 pm to nwhsallstar2000
I have a 36 volt riptide and my breaker will trip occasionally. It normally happens when I am running at high speed for a lengthy amount of time and in warmer temperatures. When I replaced my batteries about a year and a half ago, I replaced the breaker, but it will still trip occasionally. IMHO its a safeguard and doing its job when it trips.
1
Posted on 6/9/17 at 2:13 pm to jobbieman
Minn Kota rigging chart
This minn Kota rigging chart link says your trolling motor should have a 60 amp breaker. I was having a very similar issue with my 80lb ulterra it would pop the 50 if the wind was blowing really hard and it was on anchor. Before I swapped it, it was doing it more and more often. I bought one of these
ETA: Theriot was a little quicker than me!
This minn Kota rigging chart link says your trolling motor should have a 60 amp breaker. I was having a very similar issue with my 80lb ulterra it would pop the 50 if the wind was blowing really hard and it was on anchor. Before I swapped it, it was doing it more and more often. I bought one of these
ETA: Theriot was a little quicker than me!
This post was edited on 6/9/17 at 2:14 pm
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News