- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Jon boat repair : Rivets
Posted on 2/21/15 at 4:46 am to Polar Pop
Posted on 2/21/15 at 4:46 am to Polar Pop
I have a 70's model 14 ft duracraft I use for yoyoing, frogging, etc. last year it started popping rivets really bad. I used SS carriage bolts with flat washer, silicone, and lock nut. Also replaced the transom using the same method. I've ran yoyo's twice and went jugging a few times without any problems.
This post was edited on 2/21/15 at 4:48 am
Posted on 2/21/15 at 5:39 am to dpark
Don't use SS. Dissimilar metal's are asking for corrosion.
Read this. LINK
If it were me, I would grind off the heads of the rivets and punch them out. Just the ones at the top of the knee and transom. Leave the bottom knee rivets in place. Just pry the knee away from the transom to replace the plywood. Then bolt back with brass nuts, washers and bolts and a dab of 5200.
Or have it weld back up.
Read this. LINK
If it were me, I would grind off the heads of the rivets and punch them out. Just the ones at the top of the knee and transom. Leave the bottom knee rivets in place. Just pry the knee away from the transom to replace the plywood. Then bolt back with brass nuts, washers and bolts and a dab of 5200.
Or have it weld back up.
Popular
Back to top
Follow TigerDroppings for LSU Football News