- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: I've Bought a Muzzle Suppressor
Posted on 1/21/15 at 5:03 pm to AUTimbo
Posted on 1/21/15 at 5:03 pm to AUTimbo
just measured the threads on barrels. Factory CZ barrel that shoots fine and groups like it should has 0.6" threads. Barrels threaded by gunsmith are 0.4" these barrels don't shoot worth a flip with suppressor installed.
To OP if you have a long slim barrel I might think asking about the effects of adding a suppressor to a slim profile barrel.
To OP if you have a long slim barrel I might think asking about the effects of adding a suppressor to a slim profile barrel.
This post was edited on 1/21/15 at 5:06 pm
1
Posted on 1/22/15 at 12:04 am to civiltiger07
Civiltiger07 and AUTImbo, I appreciate the experience you've both brought to the discussion. I'd never thought that how far the threads extend from the muzzle to the receiver could make a difference, but I see that now. I'm a little confused in that it seems as if y'all have polar opposite experiences w/ each other, but sometimes guns can be like that. I plan on sending an email to Silencerco and seeing what they have to say, as well.
I've got a friend locally who threaded a bunch of barrels; he said he'd help me w/ mine. I think I'll thread the factory barrel on my 30 yr old 77/22 and see how it shoots. If I don't like the results, I can get a new barrel. My barrel is 20" long and thin (OD 0.55"). I could see where altering the barrel harmonics could have either a good, or bad, effect on the accuracy of a barrel.
I've got a friend locally who threaded a bunch of barrels; he said he'd help me w/ mine. I think I'll thread the factory barrel on my 30 yr old 77/22 and see how it shoots. If I don't like the results, I can get a new barrel. My barrel is 20" long and thin (OD 0.55"). I could see where altering the barrel harmonics could have either a good, or bad, effect on the accuracy of a barrel.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News