Started By
Message

re: My new Glock 19 jams a bunch

Posted on 1/13/14 at 7:26 pm to
Posted by meauxjeaux2
watson
Member since Oct 2007
60283 posts
Posted on 1/13/14 at 7:26 pm to
There is no oil or grease on the recoil pin. Guess the flashmakes it aappear that way. Also, only way im putting a loaded mag in is with the slide off or when im ready to shoot.
Posted by BAMAisDIESEL09
Member since Jul 2012
2658 posts
Posted on 1/13/14 at 7:33 pm to
Which numbers are listed on the ejector?
This post was edited on 1/13/14 at 7:34 pm
Posted by LSUwag
Florida man
Member since Jan 2007
17321 posts
Posted on 1/13/14 at 7:39 pm to
quote:

There is no oil or grease on the recoil pin. Guess the flashmakes it aappear that way. Also, only way im putting a loaded mag in is with the slide off or when im ready to shoot.



Okay. I'm a Glock certified armorer and I see nothing wrong in your photos. I would only use the Glock Magazines. My best guess is either too much oil or not enough oil I can't imagine a Glock coming from the factory with issues. Their quality control is very good.

Give it a good cleaning and oil (just a few drops for the 7 contact points that involve the slide and barrel) and try different ammo in your Glock mags, only.

One thing is certain is that Glocks do not operate well with too much oil on them. I recently attended a shooting school where I shot the same Glock 23 for two weeks and it was not cleaned one time. I shot thousands of rounds in very difficult conditions and not one failure to feed. It was filthy dirty when they finally had us break them down to clean them.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram