- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Converting an old boat trailer- any thought
Posted on 1/13/13 at 5:52 pm to ADLSUNSU
Posted on 1/13/13 at 5:52 pm to ADLSUNSU
You could weld two right angle pieces to the frame in front, maybe one in the open area in the center and just drill and use 2x6's for the base. Weld a couple or three tie down bars to the sides to strap things down and you're good to go.
eta-(personally, I'd extend the frame to about a foot behind the roller, keep it, and weld a bar or something in front, if you ever needed to come-a-long something up.
eta-(personally, I'd extend the frame to about a foot behind the roller, keep it, and weld a bar or something in front, if you ever needed to come-a-long something up.
This post was edited on 1/13/13 at 5:54 pm
1
Posted on 1/13/13 at 6:01 pm to Alahunter
quote:
I'd extend the frame to about a foot behind the roller, keep it, and weld a bar or something in front, if you ever needed to come-a-long something up.
With an expanded metal floor.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News