- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Official AR-15 thread
Posted on 12/7/19 at 7:58 pm to bbvdd
Posted on 12/7/19 at 7:58 pm to bbvdd
I actually already bought the saw and the brass jig. I have the 358 Yeti dies and 308 Winchester dies. I need the press, trimmer, scale, and all that. I've done a fair amount of internet research as far as annealing and was either going to buy the annealeez or do a diy machine. I haven't done a lot of looking at the different presses. I'll look at the two you suggested. I saw a thread of yours that suggests you know your way around a rifle and developing a load for it. I'm a little nervous about jumping in to it because I'm starting with with a pretty obscure cartridge and have no experience.
Posted on 12/7/19 at 8:59 pm to SneakyWaff1es
Don’t worry too much about that. There won’t much much info for loading but just take what is and go with it.
I did see the powder IMR 4227 recommended. It’s a good powder and I use it with my .300 blk.
I’m still learning but have built a new bolt action and really gone down a reloading hole with it.
I did see the powder IMR 4227 recommended. It’s a good powder and I use it with my .300 blk.
I’m still learning but have built a new bolt action and really gone down a reloading hole with it.
Popular
Back to top
Follow TigerDroppings for LSU Football News