re: Undermount sink fell, how to lift and hold in place

Thanks for the suggestions.

I had originally thought of the bottle jack as I have used that method in the past to hang cabinets.

After reading through the different suggestions, I went with Clames' method of using threaded rods and 2x4s. This worked like a champ

I also used construction adhesive as was suggested as opposed to silicone for the attachment.

I also took tigerfan311's advice and ordered the Never Fall Complete Sink Repair. It arrives tomorrow and that should give the construction adhesive a little of 24 hours to cure.

Between the two suggestions used/to be used, this sink should no longer fall again.

I wanted to use awestruck's suggestion but she was not available.