- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Posted on 2/13/23 at 1:12 am to Success
A tire bar works great.
Posted on 2/13/23 at 7:22 am to Success
Well dayum, 230ftlbs seems to high to me. I’d double check that.
If you watched a handful of YouTube videos you shouldn’t have an issue getting the axle out. Back is an easier job than the front to.
As for the bearings… Pop your seals out. Remove snap ring. Drive old bearing out the side the snap ring came from. Go back up in reverse. Don’t drive the new bearing in by hitting the center race, only outter. Put grease in the lips of both seals.
If you watched a handful of YouTube videos you shouldn’t have an issue getting the axle out. Back is an easier job than the front to.
As for the bearings… Pop your seals out. Remove snap ring. Drive old bearing out the side the snap ring came from. Go back up in reverse. Don’t drive the new bearing in by hitting the center race, only outter. Put grease in the lips of both seals.
Popular
Back to top
Follow TigerDroppings for LSU Football News