- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Master Bedroom Closet Build - Complete
Posted on 7/15/20 at 11:32 am to Azazello
Posted on 7/15/20 at 11:32 am to Azazello
quote:
I have the small, cheap one. At some point I am going to upgrade to the K5.
No lie, your life will change
My K4 came with the small one as well and I gave it away. It's like night and day.
0
Posted on 7/15/20 at 12:46 pm to Baers Foot
I did something like is talked about in the “Dividers” section of the link below. I put them along studs and used pocket holes to secure to the studs. I didn’t have a backing panel, just the wall, but pocket holes into a thick enough backer would’ve worked, too.
LINK
I found using cedar drawer liner to line the bottoms of shelves and using cedar edge banding on the fronts of shelves (and/or panels) is a neat touch.
LINK
I found using cedar drawer liner to line the bottoms of shelves and using cedar edge banding on the fronts of shelves (and/or panels) is a neat touch.
This post was edited on 7/15/20 at 12:52 pm
Posted on 7/15/20 at 3:05 pm to Baers Foot
quote:
Looking to do something like this for the wife also. Your 2x4 base not tied into the floor? Did you just secure via pocket holes with the wall backer?
Attached it straight to the studs and then used 16g brad nails to attach the plywood to the top.
Page 2 of 2
Popular
Back to top
Follow TigerDroppings for LSU Football News