- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Polaris ranger issues
Posted on 11/8/20 at 2:42 pm to MallardMaster
Posted on 11/8/20 at 2:42 pm to MallardMaster
Pull the codes
When you disconnect the battery you are clearing the codes. This should do it
Turn the key off for 30 seconds. Do the following within 5 seconds: Key ON, OFF, ON, OFF, ON (don't start the engine). Keep your eye on the CEL. The display will either say "Wait" and then the CEL will start blinking; or the CEL will start blinking right away. In either case, count the number of blinks between each long pause (b is blink P is pause= ex b P bb P bbbb P b P bbbbbb P b). The codes are in two-digit numbers so the previous sequence would be 12, 41, 61. 12 = start and 61 = end. 12 may or may not happen.
Hopefully this helps
When you disconnect the battery you are clearing the codes. This should do it
Turn the key off for 30 seconds. Do the following within 5 seconds: Key ON, OFF, ON, OFF, ON (don't start the engine). Keep your eye on the CEL. The display will either say "Wait" and then the CEL will start blinking; or the CEL will start blinking right away. In either case, count the number of blinks between each long pause (b is blink P is pause= ex b P bb P bbbb P b P bbbbbb P b). The codes are in two-digit numbers so the previous sequence would be 12, 41, 61. 12 = start and 61 = end. 12 may or may not happen.
Hopefully this helps
0
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News