- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: I bled the hydraulic. Still won’t go in. JD h120. Updated w video
Posted on 10/23/20 at 12:20 pm to tigerfoot
Posted on 10/23/20 at 12:20 pm to tigerfoot
Rule of thumb for me is anytime I disconnect an implement, lower everything to the ground, turn the tractor off, cycle through all the positions for that hookup, then unhook.
Hooking up, get in position, turn off the tractor, move the levers for that hookup through all their positions, then hookup.
The key is not to have pressure on either side, the tractor side or implement side.
Hooking up, get in position, turn off the tractor, move the levers for that hookup through all their positions, then hookup.
The key is not to have pressure on either side, the tractor side or implement side.
This post was edited on 10/23/20 at 12:26 pm
Posted on 10/23/20 at 12:26 pm to td1
I will say that the valve came out while using.
I did not disconnect.
I did not disconnect.
Popular
Back to top
Follow TigerDroppings for LSU Football News