re: OT Plumbers - I accidentally drilled a hole in toilet drain pipe. What now?

quote:

---

Ummmmmmm, this is not going to work. The outside of the pipe with the hole will have a larger radius of curvature than the inside of the patch piece of pipe. To go with this idea, you'll need to find a piece of pipe that has an inside diameter equal to the outside diameter of the piece you drilled. Good luck with that. If you get lucky with that, buy a few lottery tickets while you are out.

---

Did you notice the part where I mentioned the glue, OR how bout the part where I had him prepatx the hole with silicone?

Look ,dumbass engineer, it's is a NO pressure pipe using gravity only. A large was of silly puddy would basically work.

But, the hole is only 3/8" so he would only need a piece 1" square. IT WOULD TOUCH ON ALL SIDES