Started By
Message

re: How difficult is it to install a leveling kit?

Posted on 10/23/14 at 12:51 pm to
Posted by Boats n Hose
NOLA
Member since Apr 2011
37248 posts
Posted on 10/23/14 at 12:51 pm to
quote:

For leveling height, see my earlier post. I wouldn't go any higher than 2" though. In your other thread you can see my truck sitting almost level with my boat (3000lbs) and I'm at the stock rake like you. If I had a 2" level I would be nose high when towing (learned the hard way in my last truck)


Yea. I put a 3" on m 07. 2wd. Didn't realize how tall it was. Was nose high with no load on it. Had to build 1.5" blocks for the rear. Now it sits just about level, maybe rear a quarter inch to half inch high. With a heavy enough loud it still goes nose high, but with the boats I normally pull it's fine.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram