- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Calling OT Mechanics: Explorer stops accelerating
Posted on 9/3/14 at 9:09 pm to meauxjeaux2
Posted on 9/3/14 at 9:09 pm to meauxjeaux2
quote:
Wife drives 2008 Ford Edge. 3.5l AWD. Transfer case was blowing oil out of the vent. Unserviceable unit. I removed the lower transmission mount and exhaust. Drilled 1/2" hole in a specified position. I'll send you a pic of where I drilled it later. There is a fill plug but no drain. Completely flushed out the oil which had became grease. Threaded the new hole and inserted a drain plug. Filled with Mobil 1 full synthetic 140 w 75. Issue fixed. All Edges, Explorers, Flexes and Taurus's have this same transfer case and are having major issues with them since the transfer case stays engaged all the time. When the sensors detect slip on a wheel the rear differential is locked in by a solenoid on the rear differential.
Damn
Posted on 9/3/14 at 9:15 pm to LSUOFFSHORE
Most AWD systems will engage the transfer case when needed. The Ford units stay engaged all the time causing heat issues. Transfer case stays engaged, driveshaft spins all the time but the read dif. Stays unlocked unless told to lock by the PCM.
It's a fricked up design.
It's a fricked up design.
Popular
Back to top
Follow TigerDroppings for LSU Football News