re: The second pirogue build is on

All answers are in above post.

Put two pieces of plywood on ground c side up and butt them together.

Measure 13" to the inside from the edge on both sides. Do that at one end and at 14'6" from that same end.


Now measure on the factory edge 7" from each end of the 14'6" making the factory edge cut diminsion 13'10" . Draw a straight line from those marks back up to the first marks.

The curve is offset with the 3" max declination peak of the curve 68" from one end and roughly at the location of the splice.



Now you should have a trapazoid shape that has a short side of 13'10 and a long concaved side roughly 14'6" long.