- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: The second pirogue build is on
Posted on 5/26/14 at 4:28 pm to fishfighter
Posted on 5/26/14 at 4:28 pm to fishfighter
quote:
Those were 14' 6" long. The side was set to be 10".
What was the tapper from one end to the middle to the other end?
Posted on 5/26/14 at 4:32 pm to Jarlaxle
13' 4".
Setting up the arch is the most important thing.
Setting up the arch is the most important thing.
This post was edited on 5/26/14 at 4:33 pm
Posted on 5/26/14 at 4:51 pm to Jarlaxle
All answers are in above post.
Put two pieces of plywood on ground c side up and butt them together.
Measure 13" to the inside from the edge on both sides. Do that at one end and at 14'6" from that same end.
Now measure on the factory edge 7" from each end of the 14'6" making the factory edge cut diminsion 13'10" . Draw a straight line from those marks back up to the first marks.
The curve is offset with the 3" max declination peak of the curve 68" from one end and roughly at the location of the splice.
Now you should have a trapazoid shape that has a short side of 13'10 and a long concaved side roughly 14'6" long.
Put two pieces of plywood on ground c side up and butt them together.
Measure 13" to the inside from the edge on both sides. Do that at one end and at 14'6" from that same end.
Now measure on the factory edge 7" from each end of the 14'6" making the factory edge cut diminsion 13'10" . Draw a straight line from those marks back up to the first marks.
The curve is offset with the 3" max declination peak of the curve 68" from one end and roughly at the location of the splice.
Now you should have a trapazoid shape that has a short side of 13'10 and a long concaved side roughly 14'6" long.
Popular
Back to top
Follow TigerDroppings for LSU Football News