- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Official AR-15 thread
Posted on 2/4/13 at 9:57 pm to RATeamWannabe
Posted on 2/4/13 at 9:57 pm to RATeamWannabe
I think were on the same page but I'm doing a shitty job of getting my point across.
The A2 that is on there currently puts it at 14.5 which is too short. If they put an A2x2 on there it will make it 16". So the new A2x2 hider by itself is 3" long?
If so does it not look a little out of proportion?
The A2 that is on there currently puts it at 14.5 which is too short. If they put an A2x2 on there it will make it 16". So the new A2x2 hider by itself is 3" long?
If so does it not look a little out of proportion?
2
Posted on 2/4/13 at 10:00 pm to Drew Orleans
No the barrel is only 14.5" with the regular flash hider, I believe it only makes it to 15" since the flash hider adds a little over 1" to the barrel.
Posted on 2/4/13 at 10:00 pm to Drew Orleans
No, because the BARREL is 14.5, they dont measure the end of the standard flash. As it sits with the standard, its a 14.5 barrel, and 15.5 total. But when you weld and pin a A2x2 or other compensator, it becomes a permanent attachment, and then its measured from the end of the device
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News