- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Homebrewing: All Grain Mash Tun
Posted on 6/8/12 at 11:00 am to Fratastic423
Posted on 6/8/12 at 11:00 am to Fratastic423
quote:
You cannot connect tubing directly to the ball valve without a barb fitting. So you have to get the barb fittings along with any ball valve you are going to use.
Oh, i got you. So the ball valve needs connections on both ends. One going into the ball valve, and one on the exterior end of the ball valve to drain to your brew pot.
ETA: and in further examination of the picture, i think i get it now. The false bottom IS below the opening. The grains rise because they are less dense than the water, and due to the volume of the water, the pressure from the water pushes it up into the opening in the bottome of the false bottom, through the tubing, out through the ball valve.
I got it now. I couldn't wrap my mind around it initially. Thanks for the help.
This post was edited on 6/8/12 at 11:04 am
Popular
Back to top
Follow TigerDroppings for LSU Football News