- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Brick Paver Install Question
Posted on 3/18/24 at 12:41 pm to LSUTiger23
Posted on 3/18/24 at 12:41 pm to LSUTiger23
I made a =/- 200 square foot patio with the 12 inch square pavers. I leveled with sand, packed down, and used those concrete/foam sheets (used for bathroom tile backing) which I drilled holes every 6 inches or so. I put about an inch of crushed stone topped with sand then the pavers. It has held up well for several years.
I don't know if it was more or less work, but it was cheap, quick and solid.
FWIW I had enough of the concrete sheets from a prior project already. They're typically 3X5 feet and reinforced with fiberglass or something. Think they're about $11 each at homedepot. Fairly light and not fragile. Easy to cut/drill.
I don't know if it was more or less work, but it was cheap, quick and solid.
FWIW I had enough of the concrete sheets from a prior project already. They're typically 3X5 feet and reinforced with fiberglass or something. Think they're about $11 each at homedepot. Fairly light and not fragile. Easy to cut/drill.
Posted on 3/18/24 at 11:22 pm to eatpie
quote:
used those concrete/foam sheets (used for bathroom tile backing)
Pretty damn good idea!
Popular
Back to top
Follow TigerDroppings for LSU Football News