I have a 2008 Mule and we went riding at the camp this past weekend. I got it stuck in some water and now it won't run normal. I got it to crank and will run while the air filter is not in, but right when I put the filter back in it cuts off. Any help on this would be great TIA

1 ...

Report Post

Posted by TexasTiger

Katy TX

Member since Sep 2003

5343 posts

Posted on 9/8/10 at 3:43 pm to Tounces

How deep is "some water"

Have you checked all the fluids in the mule?

1 ...

Report Post

Posted by Tounces

The Place

Member since Jul 2010

2252 posts

Posted on 9/8/10 at 3:46 pm to TexasTiger

yeah check the oil, checked it fine.

I put my ear up to the snorkel and I can still hear water, I guess my real question is how drain the water out

1 ...

Report Post

Posted by TexasTiger

Katy TX

Member since Sep 2003

5343 posts

Posted on 9/8/10 at 3:47 pm to Tounces

Is has to connect to the motor some how does it not.

Or you can redneck it and put a shop vac hose in the snorkel

1 ...

Report Post

Posted by Tounces

The Place

Member since Jul 2010

2252 posts

Posted on 9/8/10 at 3:49 pm to TexasTiger

haha yeah just not to familiar with this thing

1 ...

Report Post

Posted by warner4pres

NOLA

Member since Mar 2004

731 posts

Posted on 9/9/10 at 7:21 am to Tounces

Should have bought a Kubota!

1 ...

Report Post

Posted by Chris4x4gill2

North Alabama

Member since Nov 2008

3114 posts

Posted on 9/9/10 at 1:45 pm to warner4pres

Water in the snorkel? I'm not understanding how it runs at all. Disconnect the air intake from whee it enters the motor, make sure its drained well. With it still disconnected, pull the spark plugs out and turn it over a few times, make sure there isnt any water in the cylinders. Spray it with some Fogging oil or WD40 and then put it back together.

Page 1