- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Tile Wall and Screws Question
Posted on 9/23/22 at 1:10 pm
Posted on 9/23/22 at 1:10 pm
I have a hand shower accessory mounted to my tile wall in the shower. The mounting bracket started to pull away from the wall, so I removed and replaced the screw anchors and put some caulk in and around the anchors, let the caulk cure and remounted the bracket. Fast forward several months and the bracket is coming off again.
I was thinking when I replace the anchors again, of using something stronger than caulk (maybe epoxy?). Obviously, I want to be able to remove the mount in the future if something needs to be fixed.
Any suggestions on what to use that is stronger than caulk? Epoxy? 3M 5200 (that may be too permanent if I have to remove)?
I was thinking when I replace the anchors again, of using something stronger than caulk (maybe epoxy?). Obviously, I want to be able to remove the mount in the future if something needs to be fixed.
Any suggestions on what to use that is stronger than caulk? Epoxy? 3M 5200 (that may be too permanent if I have to remove)?
1
Posted on 9/23/22 at 8:08 pm to captainahab
JB Weld would work but it appears your anchors are the problem.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News