Any home bar area peeps out there?

I built a 4 tap kegerator out of a 7cf deep freeze. I also built a 3 tap portable kegerator that fits on top of a 30 gallon brute trash can. Does that count?

quote:

---

I built a 4 tap kegerator out of a 7cf deep freeze. I also built a 3 tap portable kegerator that fits on top of a 30 gallon brute trash can. Does that count?

---

I went the Coffin Keezer route. Maytag freezer, something around 14cf I think. It can fit 2 half-barrels, two sixtels, CO2 + nitro (though the nitro I bought is too tall to fit on the hump when the rest is loaded...I will adapt it eventually and go with a smaller tank)

Used Perlick flow-adjustable faucats. Basically built a 2x4 "collar" around it and drilled through the top, ran the lines through 2" Schedule 40 black iron pipe (mostly for the asthestics) which I insulated with pipe insulation on the inside. Comfortably fits 2 drink lines (5/8") per side

Just know you are playing for second place.

ETA: All of the MyQ Garage Masters series are really cool. I am jealous of the woodworking one too.

quote:

---

I went the Coffin Keezer route.

---

That is essentially what I did. I put a 2x8 collar on and replaced the lid with a insulated wood top that has the lines running up into the coffin. I can put 4 corny kegs in. Both the nitrogen and the co2 are strapped to the back out side of the keezer. The portable one is the same style made to fit a trash can and all of the lines store in the coffin for transport.