- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Beretta A300 Outlander
Posted on 9/22/21 at 4:34 pm to AndyCBR
Posted on 9/22/21 at 4:34 pm to AndyCBR
quote:
Need to get down to the piston, cylinder, mag tube, and action to clean them well.
I’ll add the chamber to this as well. I have a B-80 that’s a beretta 302 clone that struggled with dove loads but not target loads of the same weight/loading. Cleaned the gas system and action but it still wouldn’t cycle. The target loads were smooth but dove loads were a textured plastic and I noticed a little tighter to pull out by hand. Looked down the barrel and saw some crud in the chamber, tiny bit of plastic or dirt maybe. Turns out the cheaper dove loads fit the slightest bit tighter in the chamber, were getting hung up against the crud, extractor would slip, and it would jam. Hit it with a brass brush and then lightly oiled inside, and it fixed the issue completely.
Back to top
Follow TigerDroppings for LSU Football News