- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Gunsafe Refurbish Project Log (Finally Done 8/31)
Posted on 7/28/13 at 5:33 am to Cracker
Posted on 7/28/13 at 5:33 am to Cracker
Long overdue for an update.
I had another project that was taking my time but now I am going to work on this until finished.
Gluing sides:
Interior with all panels in
Internals:
Now that I had the panels and shelf standards in, I could finally cut my shelves to width.
To attach the center panel to the safe floor and the main shelf, I used dowel pins. I cut these to about 1/4" long.
The were so snug the panel would stand up on it's own.
I had another project that was taking my time but now I am going to work on this until finished.
Gluing sides:
Interior with all panels in
Internals:
Now that I had the panels and shelf standards in, I could finally cut my shelves to width.
To attach the center panel to the safe floor and the main shelf, I used dowel pins. I cut these to about 1/4" long.
The were so snug the panel would stand up on it's own.
Posted on 7/28/13 at 5:36 am to Helo
I did a quick prefit for the internals
I am not sure of the final lights yet. I want to check out some in person but for now I bought some motion activated LED hockey puck type lights.
All lit up:
Not sure where I will finally mount these but they provide decent lighting and all open when the door swings open.
All I have left is some internal trim on the inside edge of the door that wasn't there before but I want to give a more finished look the rifle cushioning and the door panel and then load it up.
I am not sure of the final lights yet. I want to check out some in person but for now I bought some motion activated LED hockey puck type lights.
All lit up:
Not sure where I will finally mount these but they provide decent lighting and all open when the door swings open.
All I have left is some internal trim on the inside edge of the door that wasn't there before but I want to give a more finished look the rifle cushioning and the door panel and then load it up.
This post was edited on 7/28/13 at 5:38 am
Popular
Back to top
Follow TigerDroppings for LSU Football News