re: Gunsafe Refurbish Project Log (Finally Done 8/31)

If you are referring to that piece standing up, that is one of the internal panels. I laminated 1/2 hardy backer board with a piece of 3/8 cork flooring.

The shelving will all be made of 3/4 and 1/2 Baltic birch.

I am still not sure how I am going to finish the padding on the inside of the rifle cut outs and the edges of the plywood shelves.

I can either route and then stain them showing the edge with actually looks decent or glue cork or hardwood banding on the edges.