Page 1
Page 1
Started By
Message

Power Pole Micro (Updated with review)

Posted on 4/13/15 at 8:38 pm
Posted by bluemoons
the marsh
Member since Oct 2012
5513 posts
Posted on 4/13/15 at 8:38 pm
Do any of yall have any hands on experience with one of these on anything other than a kayak? I'm seriously considering putting one on my boat, but the only people I've gotten actual reviews from used them on kayaks. I read about a few guys putting them on Prodigys on MMT, but there weren't any real reviews over there.

My boat + fishing load is less than the 1500lb weight limit power pole recommends, but I'm more curious about the anchor's ability to hold in stronger winds and currents in the marsh. We have an 8' Blade on our Skeeter and it's awesome, but I'm not trying to put something on my boat that I can't easily put on and take off during duck season.
This post was edited on 4/21/15 at 10:10 pm
Posted by Barf
EBR
Member since Feb 2015
3727 posts
Posted on 4/13/15 at 9:06 pm to
I had one on my skiff. I don't know what to say about it, it worked for what it was. You will have to drive a 3/4 inch anchor pin pretty deep into soft mud bottom to keep a boat that weighs 1500 pounds from moving. The mount seems pretty strong so I don't see that being a weak point.

I don't know. It's got cute little thing to mount your gopro ontop of the anchor pin.

For what it's worth, I ditched mine for something similar to a wang anchor or stickit.
Posted by bluemoons
the marsh
Member since Oct 2012
5513 posts
Posted on 4/13/15 at 10:06 pm to
Thanks for the info. I have spuds on my boat and I have more cajun anchors than I know what to do with, but I'm really looking at the micro for two specific reasons. When I'm drifting or trolling with the wind and I see a fish, I want to keep from a.) drifting further into the cut/down the bank and spooking any other fish fish, and b.) keep from dirtying the water with my trolling motor anchor. The i-Pilot anchor function works well, but it's loud and it kicks up a lot of mud in skinny water.

Posted by Barf
EBR
Member since Feb 2015
3727 posts
Posted on 4/13/15 at 10:24 pm to
I don't know man, it's a good little anchor but at the end of the day it's a $700 anchor pin. I guess maybe if you fish solo from the bow and need to be able to drop anchor via a remote. It's going to pivot on the anchor so you're going to have to use the trolling motor anyway unless you get two.

I'm on the poling platform 99% of the time so it is nothing for me to push the spike down but I use my push pole to keep from pivoting.

Like I said, they are cool little anchors and work very well. If you want one then buy all means buy one but all you would be doing is trading your current anchor pin mount for one that works without having to touch it.
Posted by bluemoons
the marsh
Member since Oct 2012
5513 posts
Posted on 4/13/15 at 10:45 pm to
quote:

works without having to touch it.


That's really it for me. I spend a lot of time fishing solo on the casting platform on my bow and I want something I can use to stay in one place without having to move/make noise/dirty up the water. I was really just worried about whether it would hold in current or wind.

I'm on my poling platform most of the time when I'm fishing with someone else, but lately I've been sightfishing a lot by myself.

This post was edited on 4/13/15 at 10:46 pm
Posted by Wtodd
Tampa, FL
Member since Oct 2013
67488 posts
Posted on 4/14/15 at 6:47 am to
Recommend looking into the Stick-It anchor system. I have one for bass boat; works great and costs a lot less than a power pole.
Posted by gorillacoco
Baton Rouge
Member since Oct 2009
5318 posts
Posted on 4/14/15 at 7:12 am to
quote:

sightfishing a lot by myself




don't be sad. some of my best fishing/hunting experiences are alone.
Posted by KG6
Member since Aug 2009
10920 posts
Posted on 4/14/15 at 7:39 am to
I've heard bad things when there is current/wind. It will deploy fine. It's when you go to pull it back up. The current puts a bind on the pole as it's stuck in the mud. Sometimes that extra bind makes it so that the motor isn't strong enough to pull it up. No personal experience, but that's what I've read.

Posted by laangler21
On the lake.
Member since May 2012
3034 posts
Posted on 4/14/15 at 8:02 am to
I've been debating one also, I think Im just going to save up and try to find a used Talon, would rather PP but not much room in my rig for the hydraulics.
Posted by QuietTiger
New Orleans
Member since Dec 2003
26256 posts
Posted on 4/14/15 at 8:50 am to
quote:

some of my best fishing experiences are alone.


Posted by PapaPogey
Baton Rouge
Member since Apr 2008
39501 posts
Posted on 4/14/15 at 8:59 am to
As much as I like powerpole, I think I would consider a Talon for the mud boat
Posted by bluemoons
the marsh
Member since Oct 2012
5513 posts
Posted on 4/14/15 at 9:31 am to
The talons look good and whatnot, but I really like that I can take the micro on and off really quickly. I also don't have the money to throw at a full size power pole or a talon.
Posted by laangler21
On the lake.
Member since May 2012
3034 posts
Posted on 4/14/15 at 11:21 am to
quote:

don't have the money to throw at a full size

I have seen used talons go for 7-800, not often, but there are some out there.
Posted by Fifthstring
Out There
Member since Jul 2006
664 posts
Posted on 4/14/15 at 12:07 pm to
A 6 foot used PP just hit the La Sportsman classifed for $500.
Posted by bluemoons
the marsh
Member since Oct 2012
5513 posts
Posted on 4/21/15 at 10:09 pm to
So the good folks over at Dockside Marine in Bogalusa let me demo one of these things yesterday on my boat. Here's my short review.

My boat is an 1850 Phowler with a Pro Drive. With everything on the boat plus the motor, I'm sitting around 900lbs empty. Add people, 12 gallons of gas, trolling motor batteries, and fishing gear and I'm pushing 1400-1500. Yesterday, I just brought my dog, but I filled up two coolers with ice to add extra weight. I fished in 1-4ft of water with soft mud bottom, and the wind was blowing +20mph at times.

Pros: The micro had absolutely zero problem holding the boat in the wind and current. I honestly thing it holds better than a regular Power Pole because of the angle of the transom. The anchor sticks towards the boat as opposed to away from it. You can adjust the angle however you want to as well. I used it with the clamp on mount, but I'm going to forego that and just through-bolt it to my transom. The clamp on mount is awesome, but you can remove it just as easily through-bolted and just take it off during duck season/whenever it's not needed. The unit itself attaches to the mounting bracket with a levered bolt contraption. It also comes with a rope attachment that serves as a quick release, but I didn't use that. I guess it's for kayakers in case a hurricane comes or something. You can also adjust the anchor force in the event the bottom is less favorable to sticking. I had no problems with the anchor retracting, and I set the anchor force at the highest setting just to see if I could stick it to the point that the motor couldn't get back up. Didn't happen.

Cons: The only negative I have to say about it is that it's really tall. It's not that noticeable on my boat because of my poling platform, but if it were on another boat it would be a little more noticeable. You can't trailer the boat with the anchor pole in the unit though. I guess you could...but unwise. You can also buy different sized anchor poles. The one I have isn't made by Power Pole, but it works just as well.

All in all, it's an awesome tool. It did everything I expected to and then some, and functioned just as well as the full size Power Pole on my Skeeter. Anybody that's fished with a Power Pole in the past knows how convenient they are and this model is no different. I wouldn't put it on a bigger bay boat or something like that, but my boat isn't exactly "small" and it did just fine.

Dockside Marine in Bogalusa also sells them for ~$150 less than pretty much anywhere else I've seen, so if you're interested and you're around there, give them a call.
Posted by AUTimbo
Member since Sep 2011
2868 posts
Posted on 4/21/15 at 10:37 pm to
Thanks for the info.
Am looking at getting a Ranger RT-188 in the somewhat near future and wanted to go with a micro or two in place of Talons or full-size PP's.
Sounds like it should work just fine.
Posted by tigerbait703
Chackbay, La
Member since Sep 2007
655 posts
Posted on 4/22/15 at 7:03 am to
I would like to know how would 2 work. I read somewhere that they don't recommend 2 because it will still twist. I guess because they don't spread out as far as a PP, but Talons go straight down. I'm not really sure how it would do. Can you sync 2 Micros together like the others?
Posted by Kingpenm3
Xanadu
Member since Aug 2011
8966 posts
Posted on 4/22/15 at 8:41 am to
Posted by tigerbait703
Chackbay, La
Member since Sep 2007
655 posts
Posted on 4/22/15 at 2:19 pm to
quote:

Dockside Marine in Bogalusa also sells them for ~$150 less than pretty much anywhere else I've seen, so if you're interested and you're around there, give them a call.


They are at Academy and everywhere else for $600. Are they $450 in Bogalusa? If so I will make the drive there to go get 2
Posted by bluemoons
the marsh
Member since Oct 2012
5513 posts
Posted on 4/22/15 at 2:25 pm to
$499 at Dockside I believe. Call to make sure. Dockside also has spikes that are cheaper than the normal $100 Power Pole spikes.

Power Pole's website talks about rigging two micros up. I'm sure you could sync them.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram